BAIC Senova BJ80

Transfer case fluid capacity & service interval

BAIC Senova BJ80 transfer case fluid capacity ranges from 1,5 to 1,8 liters. Service intervals occur every 60000 km or 36 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
BJ80 (170 kW) (2023- )
  • Use: Normal
  • Capacity 1,5 liter
  • Change 60000 km/ 36 months
  • Code: BW47-45
BJ80 (184 kW) (2023- )
  • Use: Normal
  • Capacity 1,5 liter
  • Change 60000 km/ 36 months
  • Code: BW47-45
BJ80 (206 kW) (2023- )
  • Use: Normal
  • Capacity 1,8 liter
  • Change 60000 km/ 36 months
  • Code: TF170E2

Additional Notes

  • The BAIC Senova BJ80 transfer case fluid capacity varies by engine output, with the 170 kW and 184 kW variants both holding 1.5 liters, while the 206 kW variant holds 1.8 liters.
  • The 0.3-liter difference between the lower-output variants and the 206 kW variant suggests a physically larger or differently configured transfer case unit in the higher-powered version.
  • A 1.5-liter transfer case fluid capacity is a relatively modest fill volume, consistent with compact transfer case assemblies found in mid-size four-wheel-drive vehicles.
  • All three power variants share an identical service interval of 60,000 km or 36 months under normal use conditions, whichever comes first.
  • The 36-month time limit on the service interval means the fluid is due for a change after three years even when the distance threshold has not been reached under normal use conditions.
  • The 60,000 km distance interval is a moderately long service cycle for transfer case fluid, reflecting the normal use condition applied across all three BJ80 configurations from 2023 onward.

Other Systems