BAIC Senova BJ60
Transfer case fluid capacity & service interval
BAIC Senova BJ60 requires 1,8 liters of transfer case fluid. Service intervals occur every 50000 km or 24 months. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| BJ60 (120 kW) (2023- ) |
|
| BJ60 (196 kW) (2023- ) |
|
Additional Notes
- Both the 120 kW and 196 kW variants of the BAIC Senova BJ60 share an identical transfer case fluid capacity of 1.8 liters, which is a typical service fill volume for a part-time or full-time transfer case in a mid-size SUV platform.
- A capacity figure listed without a separate dry fill or overhaul value generally indicates a single service fill specification, meaning 1.8 liters applies to routine fluid changes rather than a complete rebuild or initial factory fill scenario.
- The fluid change interval for both engine variants is set at 50,000 km or 24 months under normal use conditions, whichever comes first, reflecting a dual-trigger service schedule that accounts for both mileage accumulation and time-based fluid degradation.
- The 24-month time limit within the interval means that even low-mileage operation does not extend the service period beyond two years, since transfer case fluid can degrade chemically over time regardless of distance traveled.
- The fact that the 120 kW and 196 kW configurations carry the same 1.8-liter capacity and identical service interval suggests both variants share the same transfer case unit despite their differing power outputs.