BAIC Senova Beijing U7
Coolant capacity & service interval
BAIC Senova Beijing U7 coolant specifications cover a capacity range of 5.5 to 6.5 liters. The data includes two configurations. The fluid type specified is coolant for normal use.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Beijing U7 (100 kW) (2018- ) |
|
| Beijing U7 (120 kW) (2018- ) |
|
Additional Notes
- The BAIC Senova Beijing U7 cooling system capacity differs between power outputs, with the 100 kW variant holding 5.5 liters and the 120 kW variant holding 6.5 liters — a full liter difference attributable to the demands of the higher-output engine.
- A 5.5-liter cooling system capacity, as seen in the 100 kW configuration from 2018 onward, is a moderate figure for a passenger car, consistent with a four-cylinder engine cooling circuit that includes the radiator, heater core, and associated hoses.
- The 6.5-liter capacity recorded for the 120 kW variant reflects a larger total circuit volume, which is typical when a more powerful engine generates greater thermal load and requires additional coolant to maintain operating temperatures.
- Both configurations carry a normal use condition designation, meaning the specified capacities apply under standard driving conditions rather than severe-duty cycles such as frequent towing or extreme temperature operation.
- Both the 100 kW and 120 kW entries share the same system note of "cooling system," indicating the stated capacities represent the full cooling circuit fill rather than a partial or overflow reservoir figure.