BAIC Senova BJ60
Differential fluid capacity & service interval
BAIC Senova BJ60 uses differential fluid with a capacity range of 1,1 to 1,8 liters. The service interval is 400000 km or 24 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
Additional Notes
- The BAIC Senova BJ60 is available in two power outputs for the 2023 model year onward: 120 kW and 196 kW, and both share identical differential fluid capacities and service intervals across their front and rear units.
- The front differential on both the 120 kW and 196 kW variants holds 1.1 liters of fluid, while the rear differential holds a notably larger 1.8 liters, reflecting the typically greater size and load-bearing role of a rear differential in a vehicle of this type.
- The 0.7-liter difference between the front and rear differential capacities indicates a meaningful distinction in the physical size of the two units, which is common in rear-biased or four-wheel-drive platforms where the rear differential handles a higher proportion of torque delivery.
- Under normal use conditions, the service interval for all four differential positions across both power variants is set at 400,000 km or 24 months, whichever comes first. The distance figure is exceptionally high by conventional standards and reflects a manufacturer-specified extended-life fluid change schedule rather than a short-cycle maintenance approach.
- The 24-month time-based interval runs alongside the 400,000 km mileage threshold, meaning a fluid change is due when either condition is reached first. For most driving patterns, the 24-month mark would be reached well before the distance limit, making the time interval the more practically relevant trigger.