BAIC Senova BJ80

Brake fluid capacity & service interval

BAIC Senova BJ80 uses brake fluid with a capacity of 0,63 liter. Service intervals for the fluid are 400000 km or 24 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
BJ80 (170 kW) (2023- )
  • Use: Normal
  • Capacity 0,63 liter
  • Change 400000 km/ 24 months
BJ80 (184 kW) (2023- )
  • Use: Normal
  • Capacity 0,63 liter
  • Change 400000 km/ 24 months
BJ80 (206 kW) (2023- )
  • Use: Normal
  • Capacity 0,63 liter
  • Change 400000 km/ 24 months

Additional Notes

  • The BAIC Senova BJ80 hydraulic brake/clutch system holds a capacity of 0.63 liter across the 170 kW, 184 kW, and 206 kW variants introduced in 2023.
  • A 0.63-liter figure represents a service fill capacity, meaning the volume required to replenish or refill the hydraulic system during a fluid change rather than a full overhaul of the braking components.
  • The brake fluid change interval is specified at 400,000 km or 24 months under normal use conditions, whichever comes first. The 24-month time-based threshold reflects the hygroscopic nature of brake fluid, which absorbs moisture over time regardless of mileage.
  • All three power variants, 170 kW, 184 kW, and 206 kW, share an identical 0.63-liter capacity and the same 400,000 km/24-month change interval, indicating no variation in brake system volume or service scheduling across the 2023 engine lineup.
  • The note specifying a combined hydraulic brake/clutch system means the single 0.63-liter capacity figure covers both the braking and clutch hydraulic circuits, as both share the same fluid reservoir in this configuration.

Other Systems