BAIC Senova BJ80

Power steering fluid capacity & service interval

BAIC Senova BJ80 power steering fluid capacity is 1,2 liters. Service intervals are 60000 km or 36 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
BJ80 (170 kW) (2023- )
  • Use: Normal
  • Capacity 1,2 liter
  • Change 60000 km/ 36 months
BJ80 (184 kW) (2023- )
  • Use: Normal
  • Capacity 1,2 liter
  • Change 60000 km/ 36 months
BJ80 (206 kW) (2023- )
  • Use: Normal
  • Capacity 1,2 liter
  • Change 60000 km/ 36 months

Additional Notes

  • All three BJ80 variants covered in the specifications share an identical power steering fluid capacity of 1.2 liters, indicating a uniform reservoir and system volume across the 170 kW, 184 kW, and 206 kW engine outputs.
  • A capacity figure of 1.2 liters is consistent with a service fill quantity, meaning the amount required when draining and refilling the power steering system during a scheduled fluid change rather than a full system overhaul.
  • The BAIC Senova BJ80 power steering fluid change interval is specified at 60,000 km or 36 months, whichever comes first, and applies under normal use conditions across all three power output variants.
  • The 36-month time-based limit means a fluid change is due after three years of use even when the 60,000 km distance threshold has not been reached, reflecting the degradation of hydraulic fluid over time regardless of mileage.
  • The alignment of capacity and interval values across the 170 kW, 184 kW, and 206 kW configurations from 2023 onward suggests the BJ80 uses the same power steering hardware regardless of engine output level.

Other Systems