Holder C Generation 2000 series
Power steering fluid capacity & service interval
Holder C Generation 2000 series uses power steering fluid with a capacity of 5,5 liters. Service intervals include checks at 150 hours and changes at 1500 hours or 12 months. The data covers 1 configuration.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
Additional Notes
- The Holder C 30 carries a power steering fluid capacity of 5.5 liters, which represents the full hydraulic system volume rather than a partial service top-up figure.
- The fluid change interval for the C 30 is set at 1500 hours or 12 months, whichever comes first under normal use conditions, combining both a time-based and an hour-based threshold.
- A separate check interval of 150 hours is specified alongside the full change interval, meaning the hydraulic fluid level is inspected far more frequently than the fluid is replaced.
- The 150-hour check interval represents roughly one-tenth of the full 1500-hour change cycle, indicating a relatively close monitoring schedule relative to the total service life of the fluid.
- The specifications cover the C 30 across the 1990-1994 model years, with no variation in capacity or interval values noted across that production span.
- The system is described as a combined hydraulic and power steering circuit, meaning the 5.5-liter capacity figure applies to the shared fluid volume serving both functions.