Holder C Generation 2000 series

Brake fluid capacity & service interval

Holder C Generation 2000 series uses brake fluid with a capacity of 0,4 liter. Service intervals include checks every 150 hours and changes every 12 months. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
C 760 (1994-2001)
  • Use: Normal
  • Capacity 0,4 liter
  • Check 150 hours
  • Change 12 months
C 770 (1994-2001)
  • Use: Normal
  • Capacity 0,4 liter
  • Check 150 hours
  • Change 12 months
C 770H (1994-2001)
  • Use: Normal
  • Capacity 0,4 liter
  • Check 150 hours
  • Change 12 months
C 860 (1994-2001)
  • Use: Normal
  • Capacity 0,4 liter
  • Check 150 hours
  • Change 12 months
C 860F (1994-2001)
  • Use: Normal
  • Capacity 0,4 liter
  • Check 150 hours
  • Change 12 months
C 870 (1994-2001)
  • Use: Normal
  • Capacity 0,4 liter
  • Check 150 hours
  • Change 12 months
C 870H (1994-2001)
  • Use: Normal
  • Capacity 0,4 liter
  • Check 150 hours
  • Change 12 months
C 9600 (1994-2001)
  • Use: Normal
  • Capacity 0,4 liter
  • Check 150 hours
  • Change 12 months
C 9700H (1994-2001)
  • Use: Normal
  • Capacity 0,4 liter
  • Check 150 hours
  • Change 12 months

Additional Notes

  • The Holder C Generation 2000 series brake fluid capacity of 0.4 liter applies uniformly across all nine variants in the 1994-2001 range, from the C 760 through the C 9700H. A 0.4-liter figure is characteristic of a compact hydraulic circuit, consistent with the relatively small reservoir volumes found in compact utility tractors and municipal machines of this class.
  • The check interval of 150 hours is tied to operational time rather than calendar time, making it relevant to machines that accumulate working hours at variable rates. A 150-hour threshold is a common mid-range inspection point in agricultural and municipal equipment service schedules, falling between shorter daily checks and longer seasonal overhauls.
  • The change interval of 12 months applies under normal use conditions across all listed variants. A calendar-based fluid change interval for brake fluid reflects the hygroscopic nature of conventional brake fluids, which absorb moisture from the atmosphere over time regardless of operating hours, gradually lowering the fluid's boiling point.
  • Two variants, the C 770H and the C 870H, are specified with a hydraulic brake/clutch system rather than a hydraulic brake system alone. Despite serving a combined brake and clutch function, the fluid capacity of 0.4 liter and the service intervals remain identical to those of the brake-only variants in the same lineup.
  • The C 860F is distinguished from the standard C 860 by its model designation suffix, yet the brake fluid specifications, including capacity, check interval, and change interval, are identical between the two. The shared specifications indicate no difference in hydraulic brake circuit volume between those two variants.
  • All specifications across the nine variants are listed under normal use conditions. In equipment service documentation, a normal use classification typically refers to standard operating environments, as opposed to severe conditions such as extreme temperatures, heavy contamination exposure, or unusually high duty cycles that would otherwise warrant shortened intervals.

Other Systems