Holder C Generation 2000 series

Clutch fluid capacity & service interval

Holder C Generation 2000 series uses clutch fluid with a capacity of 0,25 liter. Service intervals include checks every 150 hours and changes every 12 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
C 760 (1994-2001)
  • Use: Normal
  • Capacity 0,25 liter
  • Check 150 hours
  • Change 12 months
C 770 (1994-2001)
  • Use: Normal
  • Capacity 0,25 liter
  • Check 150 hours
  • Change 12 months
C 860 (1994-2001)
  • Use: Normal
  • Capacity 0,25 liter
  • Check 150 hours
  • Change 12 months
C 860F (1994-2001)
  • Use: Normal
  • Capacity 0,25 liter
  • Check 150 hours
  • Change 12 months
C 870 (1994-2001)
  • Use: Normal
  • Capacity 0,25 liter
  • Check 150 hours
  • Change 12 months
C 9600 (1994-2001)
  • Use: Normal
  • Capacity 0,25 liter
  • Check 150 hours
  • Change 12 months

Additional Notes

  • The Holder C Generation 2000 series hydraulic clutch system holds 0.25 liter across all six variants — the C 760, C 770, C 860, C 860F, C 870, and C 9600. A capacity this small is characteristic of a closed hydraulic actuator circuit rather than a large reservoir-fed transmission system, where fluid volumes are typically measured in liters rather than fractions.
  • The 0.25 liter figure applies uniformly across all variants covered in the 1994-2001 production span, with no variation by model designation or year within that range.
  • The check interval is set at 150 hours of operation under normal use conditions. In equipment service schedules, hour-based intervals are tied to actual machine use rather than calendar time, making them more relevant for vehicles with variable seasonal or workload patterns.
  • A separate annual change interval of 12 months runs alongside the 150-hour check requirement. Calendar-based fluid change intervals are common in hydraulic clutch systems because brake and clutch fluids are hygroscopic — they absorb moisture over time regardless of operating hours, which degrades performance and lowers the fluid's boiling point.
  • Both the check and change intervals are specified under normal use conditions. All six variants share identical service timing, reflecting the uniform hydraulic clutch architecture across the C Generation 2000 series lineup.

Other Systems