Holder C Generation 2000 series

Coolant capacity & service interval

Holder C Generation 2000 series uses coolant with a capacity of 5,2 liters. Service intervals include checks every 10 hours and changes every 12 months. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
C 30 (1990-1994)
  • Use: Normal
  • Capacity 5,2 liter
  • Check 10 hours
  • Change 12 months

Additional Notes

  • The cooling system capacity for the Holder C Generation 2000 series C 30 is 5.2 liters, which represents a full system fill volume inclusive of the engine block, hoses, and reservoir.
  • A coolant level check interval of 10 operating hours is specified under normal use conditions for the C 30, reflecting the short inspection cycles typical of compact utility and grounds maintenance equipment.
  • The coolant change interval is set at 12 months under normal use conditions, meaning the service schedule follows a calendar-based cycle rather than an hour-meter threshold alone.

Other Systems