Lynx Shredder

Coolant capacity & service interval

Lynx Shredder coolant capacity ranges from 7,3 to 7,8 liters. Service intervals include checks every 12 months or 3000 km, and fluid changes every 60 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Shredder 600R E-TEC, Radien2 (2023- )
  • Use: Normal
  • Between min and max.
  • Check 12 months
  • Change 60 months
Shredder 850 E-TEC, Radien2 (2023- )
  • Use: Normal
  • Between min and max.
  • Check 12 months
  • Change 60 months
Shredder 850 E-TEC Turbo, Radien2 (2023- )
  • Use: Normal
  • Capacity 7,3-7,8 liter
  • Check 3000 km/ 12 months
  • Change 60 months

Additional Notes

  • The Lynx Shredder 850 E-TEC Turbo with Radien2 cooling system, starting from 2023, carries a coolant capacity of 7.3–7.8 liters, which reflects the larger thermal demands of a turbocharged engine compared to naturally aspirated configurations.
  • The 600R E-TEC and 850 E-TEC (non-turbo) Radien2 variants specify coolant level as "between min and max" rather than a fixed volume, meaning the service fill is verified against reservoir markings rather than a measured quantity.
  • Across all three 2023 Shredder configurations, the coolant change interval is set at 60 months under normal use conditions, indicating a five-year service life for the coolant fluid regardless of engine displacement or forced induction.
  • The 850 E-TEC Turbo Radien2 specifies a coolant check interval of every 3,000 km or 12 months, whichever comes first, while the 600R E-TEC and 850 E-TEC (non-turbo) Radien2 variants specify only a 12-month check interval with no distance-based trigger.
  • The addition of a kilometer-based check threshold on the 850 E-TEC Turbo reflects that higher-output turbocharged engines can accumulate thermal stress more rapidly over distance, making mileage a relevant trigger alongside calendar time.
  • All three configurations carry the same 60-month change interval despite differences in their check frequency, indicating that the fluid degradation timeline is treated uniformly across the Shredder lineup for 2023 under normal use conditions.

Other Systems