Lynx ST

Brake fluid capacity & service interval

Lynx ST brake fluid capacity ranges between min and max. Service intervals include 12 months for checks and 6000 km or 24 months for changes. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
ST 550 (2007-2008)
  • Use: Normal
  • Between min and max.
  • Check 12 months
  • Change 6000 km/ 24 months
ST 600 (2007-2008)
  • Use: Normal
  • Between min and max.
  • Check 12 months
  • Change 6000 km/ 24 months

Additional Notes

  • The Lynx ST brake fluid level specification is expressed as a range rather than a fixed volume, with the accepted fill sitting between the minimum and maximum marks on the reservoir.
  • Both the ST 550 and ST 600 share an identical service interval structure, calling for a fluid level check every 12 months under normal use conditions.
  • The change interval for brake fluid across the 2007-2008 ST 550 and ST 600 is set at 6,000 km or 24 months, whichever comes first under normal use conditions.
  • The dual-trigger change interval of 6,000 km or 24 months reflects the time-sensitive nature of brake fluid, which absorbs moisture over time regardless of distance traveled.
  • Both configurations specify a hydraulic brake system, meaning the fluid serves as the pressure-transmitting medium between the lever or pedal and the brake caliper.

Other Systems