Lynx Xterrain

Brake fluid capacity & service interval

Lynx Xterrain uses brake fluid with a capacity of 0,07 liter. Service intervals include a check every 12 months and a change every 6000 km or 24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Xterrain 850 E-TEC Turbo, Radien2 (2024- )
  • Use: Normal
  • Capacity 0,07 liter
  • Change 6000 km/ 24 months
Xterrain 600R E-TEC (2023- )
  • Use: Normal
  • Between min and max.
  • Check 12 months
  • Change 6000 km/ 24 months
Xterrain 850 E-TEC, Radien2 (2023- )
  • Use: Normal
  • Between min and max.
  • Check 12 months
  • Change 6000 km/ 24 months
Xterrain 600 EFI (2020- )
  • Use: Normal
  • Between min and max.
  • Check 12 months
  • Change 6000 km/ 24 months
Xterrain 600 E-TEC (2018-2021)
  • Use: Normal
  • Between min and max.
  • Check 12 months
  • Change 6000 km/ 24 months
Xterrain 850 E-TEC (2018-2023)
  • Use: Normal
  • Between min and max.
  • Check 12 months
  • Change 6000 km/ 24 months

Additional Notes

  • Across the Lynx Xterrain lineup, brake fluid level is maintained between the minimum and maximum reservoir marks rather than filled to a fixed volume. This range-based approach accounts for normal fluid displacement as brake pads wear over time.
  • The Xterrain 850 E-TEC Turbo, Radien2 (2024- ) is the only configuration in the lineup with a stated fixed brake fluid capacity of 0.07 liter. A discrete capacity figure of this kind typically corresponds to a full system fill during overhaul or component replacement rather than a routine top-up.
  • The 850 E-TEC Turbo, Radien2 is also the only configuration without a separate 12-month inspection interval listed. All other configurations specify a brake fluid check at 12 months in addition to the change interval.
  • The brake fluid change interval of 6,000 km or 24 months applies uniformly across all six configurations, regardless of engine displacement or model year. The dual-trigger format means whichever threshold is reached first governs the service event.
  • The 600 E-TEC spans 2018-2021, while the 600 EFI and 600R E-TEC represent later introductions starting in 2020 and 2023 respectively. Despite the generational difference, all three 600-series variants share identical brake fluid service specifications.
  • The 850 E-TEC covers 2018-2023, and the 850 E-TEC, Radien2 starts from 2023. Both share the min-to-max fill specification and the same check and change intervals, indicating no brake system service changes accompanied the Radien2 designation on the non-turbo 850.

Other Systems