Lynx Shredder

Brake fluid capacity & service interval

Lynx Shredder brake fluid capacity is 0,07 liter. Service intervals include a 12 month check and a 6000 km or 24 month change. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Shredder 600R E-TEC, Radien2 (2023- )
  • Use: Normal
  • Between min and max.
  • Check 12 months
  • Change 6000 km/ 24 months
Shredder 850 E-TEC, Radien2 (2023- )
  • Use: Normal
  • Between min and max.
  • Check 12 months
  • Change 6000 km/ 24 months
Shredder 850 E-TEC Turbo, Radien2 (2023- )
  • Use: Normal
  • Capacity 0,07 liter
  • Change 6000 km/ 24 months

Additional Notes

  • The Lynx Shredder 850 E-TEC Turbo with Radien2 suspension specifies a brake fluid capacity of 0.07 liter, which represents the total volume of the hydraulic brake system fill.
  • The 600R E-TEC and 850 E-TEC variants with Radien2 suspension do not state a fixed capacity figure, instead specifying that the fluid level should be maintained between the minimum and maximum marks on the reservoir.
  • All three configurations share an identical change interval of 6000 km or 24 months under normal use conditions, whichever comes first.
  • The 600R E-TEC and 850 E-TEC Radien2 configurations include a dedicated check interval of every 12 months, which falls within the 24-month change cycle, indicating a mid-cycle inspection point before a full fluid replacement is due.
  • The 850 E-TEC Turbo Radien2 specification does not include a separate check interval alongside the change interval, unlike the non-turbo 850 E-TEC and 600R E-TEC variants.
  • All three configurations are identified as hydraulic brake systems, meaning the fluid serves as the pressure-transmitting medium between the brake lever or pedal and the caliper.

Other Systems