Toyota Proace (EU)
Power steering fluid capacity & service interval
Toyota Proace (EU) requires power steering fluid with a capacity of 1,2 liters. Service intervals consist of checks every 12 months or 30000 km. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Proace 1.6 HDi (2013-2016) |
|
| Proace 2.0 DPF (120 kW) (2013-2016) |
|
| Proace 2.0 HDi (88 kW) (2013-2016) |
|
| Proace 2.0 HDi (94 kW) (2013-2016) |
|
Additional Notes
- The Toyota Proace (EU) power steering system holds 1.2 liters across all four engine variants covered in the 2013-2016 range, including the 1.6 HDi, the 2.0 DPF (120 kW), and both 2.0 HDi outputs at 88 kW and 94 kW.
- A 1.2-liter capacity is typical of a hydraulic power steering reservoir service fill, representing the fluid volume held within the pump reservoir and associated lines rather than a full system overhaul quantity.
- The check interval is set at 12 months or 30,000 km under normal use conditions, whichever comes first. Normal use generally refers to standard on-road driving without the added stress of frequent towing, extreme temperatures, or heavy stop-and-go operation.
- The 30,000 km distance threshold aligns with a moderate-frequency maintenance schedule, common for commercial light vans operated in mixed urban and highway conditions.
- Despite the difference in power output between the two 2.0 HDi variants — 88 kW and 94 kW — both share an identical 1.2-liter capacity and the same 12-month/30,000 km check interval, indicating the power steering system architecture is consistent across those engine tunes.
- The 2.0 DPF (120 kW) variant, which carries a diesel particulate filter designation, also shares the same 1.2-liter capacity and check interval as the HDi variants, reflecting a uniform power steering specification regardless of emissions equipment differences.