Toyota Proace (EU)
Brake fluid capacity & service interval
Toyota Proace (EU) requires brake fluid with a capacity range of 0,5 to 0,54 liters. Service intervals consist of checks every 12 months or 30000 km. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Proace 1.6 HDi (2013-2016) |
|
| Proace 2.0 DPF (120 kW) (2013-2016) |
|
| Proace 2.0 HDi (88 kW) (2013-2016) |
|
| Proace 2.0 HDi (94 kW) (2013-2016) |
|
Additional Notes
- The Toyota Proace (EU) brake fluid specifications cover four engine variants across the 2013-2016 model years, all rated under normal use conditions.
- The 1.6 HDi and 2.0 HDi (88 kW) variants share a brake fluid capacity of 0.5 liter, while the 2.0 DPF (120 kW) and 2.0 HDi (94 kW) variants each carry a slightly higher capacity of 0.54 liter.
- The 0.04-liter difference between the two capacity figures reflects variation in hydraulic circuit volume, which can result from differences in brake hardware sizing, line routing, or the inclusion of additional hydraulic components across engine configurations.
- The 1.6 HDi, 2.0 DPF (120 kW), and 2.0 HDi (88 kW) variants are each noted as serving a combined hydraulic brake and clutch system, meaning a single fluid reservoir supplies both functions simultaneously.
- The 2.0 HDi (94 kW) variant is noted specifically as a hydraulic brake system only, distinguishing the circuit scope from the other three variants despite sharing the same 0.54-liter capacity as the 2.0 DPF (120 kW).
- All four variants share an identical check interval of 12 months or 30,000 km under normal use, whichever comes first. Brake fluid check intervals at this frequency account for the hygroscopic nature of brake fluid, which absorbs moisture over time and lowers the fluid's boiling point.