Toyota Proace (EU)

Additional Notes

• All listed Toyota Proace (EU) DANGEL 4x4 configurations share an identical rear differential fluid capacity of 1.65 liters, which is a typical service fill volume for a light commercial vehicle rear axle unit of this class.
• The DANGEL 4x4 designation refers to a four-wheel-drive conversion applied to the Proace by the French specialist manufacturer Dangel, meaning the rear differential is an added drivetrain component not present in standard two-wheel-drive variants.
• A service fill capacity of 1.65 liters reflects the amount of fluid required during a routine drain-and-refill service, as opposed to a larger overhaul or assembly fill that would account for additional volume in associated transfer components.
• The change interval across all five configurations is set at 40,000 km or 12 months, whichever comes first, under normal use conditions. The time-based limit of 12 months means fluid age alone can trigger a service requirement even when mileage accumulation is low.
• The 40,000 km interval for rear differential fluid is notably shorter than engine oil intervals on many modern vehicles, reflecting the higher contamination and wear-particle accumulation rates typical of gear oil in a driven axle.
• Power output varies across the listed configurations, spanning 90 kW, 110 kW, and 106 kW versions of the 2.0 D-4D engine, yet the rear differential fluid capacity and change interval remain uniform across all three output levels.
• The 90 kW and 110 kW DANGEL 4x4 variants each appear across two separate year ranges, 2016-2018 and 2018-2022, with no difference in differential fluid specifications between the earlier and later production periods for either power level.
• The 106 kW DANGEL 4x4 variant carries a starting year of 2020, making it the most recent engine output introduced among the listed configurations, while still sharing the same 1.65-liter capacity and 40,000 km/12-month service interval.