Toyota Proace (EU)

Coolant capacity & service interval

Toyota Proace (EU) coolant capacity ranges between min and max. Service intervals include checks at 30000 km/ 12 months, changes at 30000 km/ 12 months, and changes at 120000 km/ 48 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Proace 1.6 HDi (2013-2016)
  • Use: Normal
  • Between min and max.
  • Check 30000 km/ 12 months
  • Change 30000 km/ 12 months
Proace 1.6 HDi (2013-2016)
  • Use: First change only
  • Between min and max.
  • Change 120000 km/ 48 months
Proace 2.0 DPF (120 kW) (2013-2016)
  • Use: Normal
  • Between min and max.
  • Check 30000 km/ 12 months
  • Change 30000 km/ 12 months
Proace 2.0 DPF (120 kW) (2013-2016)
  • Use: First change only
  • Between min and max.
  • Change 120000 km/ 48 months
Proace 2.0 HDi (88 kW) (2013-2016)
  • Use: Normal
  • Between min and max.
  • Check 30000 km/ 12 months
  • Change 30000 km/ 12 months
Proace 2.0 HDi (88 kW) (2013-2016)
  • Use: First change only
  • Between min and max.
  • Change 120000 km/ 48 months
Proace 2.0 HDi (94 kW) (2013-2016)
  • Use: Normal
  • Between min and max.
  • Check 30000 km/ 12 months
  • Change 30000 km/ 12 months
Proace 2.0 HDi (94 kW) (2013-2016)
  • Use: First change only
  • Between min and max.
  • Change 120000 km/ 48 months

Additional Notes

  • Coolant capacity across all Toyota Proace (EU) configurations from 2013-2016 is expressed as a fill level between the minimum and maximum marks rather than a fixed volume, meaning the correct fill point is determined by the reservoir markings rather than a measured quantity.
  • All four engine variants covered in the 2013-2016 range share an identical normal-use check interval of 30,000 km or 12 months, whichever comes first, alongside a change interval of the same 30,000 km or 12 months.
  • The first-change-only condition applies a significantly extended interval of 120,000 km or 48 months across all listed configurations, reflecting the longer service life of the factory-fill coolant charge before the standard recurring schedule takes over.
  • The 1.6 HDi and both 2.0 HDi output variants (88 kW and 94 kW) follow the same dual-interval structure, with a short normal-use cycle and a single extended first-change interval, indicating a consistent cooling system service approach across the diesel engine range.
  • The 2.0 DPF (120 kW) variant, despite carrying a diesel particulate filter designation that distinguishes it from the standard HDi units, carries the same coolant check and change intervals as the other engines in the 2013-2016 lineup.
  • The 48-month time limit on the first-change-only interval means that even if a vehicle has not reached 120,000 km, the coolant change is due at four years, whichever threshold is met first.

Other Systems