Toyota Proace City (EU)

Automatic transmission fluid capacity & service interval

Toyota Proace City (EU) automatic transmission fluid capacity ranges from 3,5 to 7 liters. Service intervals are not specified. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Proace CIty 1.2 Turbo (96 kW) (2019-2022)
  • Use: Normal
  • Capacity 6-7 liter (Dry fill)
  • Capacity 3,5 liter (Service fill)
  • Code: ATN8 8/1
Proace CIty 1.5 D-4D (96 kW) (2019- )
  • Use: Normal
  • Capacity 6-7 liter (Dry fill)
  • Capacity 3,5 liter (Service fill)
  • Code: ATN8 8/1
Proace CIty 1.5 D-4D (96 kW) DANGEL 4x4 (2019- )
  • Use: Normal
  • Capacity 6-7 liter (Dry fill)
  • Capacity 3,5 liter (Service fill)
  • Code: ATN8 8/1

Additional Notes

  • The Toyota Proace City (EU) automatic transaxle carries a dry fill capacity of 6-7 liters, a range that reflects the total fluid volume required when filling a completely drained or newly assembled unit where all internal passages and the torque converter are empty.
  • The service fill capacity across all three listed configurations is 3.5 liters, representing the amount of fluid needed during a routine drain-and-refill where residual fluid remains in the torque converter and valve body.
  • The gap between the dry fill figure of 6-7 liters and the service fill figure of 3.5 liters indicates that roughly half the total fluid volume is retained within the transmission assembly during a standard service procedure.
  • The 1.2 Turbo (96 kW) petrol variant and the 1.5 D-4D (96 kW) diesel variant share identical dry and service fill capacities, meaning the automatic transaxle fluid volume does not differ between the petrol and diesel powertrains in the 2019-2022 period.
  • The 1.5 D-4D (96 kW) DANGEL 4x4 configuration retains the same 3.5-liter service fill and 6-7 liter dry fill as the standard two-wheel-drive diesel variant, indicating the DANGEL four-wheel-drive conversion does not alter the automatic transaxle fluid capacity.
  • All three configurations carry a normal use condition designation, meaning the listed capacities and service parameters apply to standard operating conditions rather than a severe-duty or first-change-only scenario.

Other Systems