Cupra Formentor, KM
AdBlue (DEF) capacity & service interval
The Cupra Formentor, KM uses AdBlue (DEF) fluid with a capacity of 12 liters. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Formentor 2.0 TDI (110 kW) (2020- ) |
|
| Formentor 2.0 TDI (110 kW) 4Drive (2020- ) |
|
Additional Notes
- Both the Cupra Formentor 2.0 TDI (110 kW) and the 2.0 TDI (110 kW) 4Drive, each introduced in 2020, share an identical AdBlue tank capacity of 12 liters, which is a mid-range tank size typical of passenger car SCR systems designed to allow several thousand kilometers between refills under normal driving conditions.
- The 12-liter capacity listed for both configurations applies under normal use conditions, meaning the figure reflects standard operating expectations rather than a severe-duty or first-fill scenario.
- The selective catalytic reduction system noted for both variants uses AdBlue to reduce nitrogen oxide emissions, and a 12-liter reservoir at normal consumption rates generally supports intervals that align with scheduled maintenance cycles rather than requiring standalone top-ups between services.
- No capacity difference exists between the rear-wheel-drive 2.0 TDI (110 kW) and the 4Drive all-wheel-drive variant, indicating the AdBlue tank specification was carried over unchanged regardless of drivetrain configuration.