Cupra Formentor, KM

Manual transmission fluid capacity & service interval

The Cupra Formentor, KM uses manual transmission fluid with a capacity of 1.5 liters. The data covers 2 configurations of this model.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Formentor 1.5 TSI (110 kW) PF (2020- )
  • Use: Normal
  • Capacity 1,5 liter
  • Code: 0C9 (MQ281) 6/1
Formentor 2.0 TDI (110 kW) (2020- )
  • Use: Normal
  • Capacity 1,5 liter (Initial fill)
  • Code: 0C9 (MQ281) 6/1

Additional Notes

  • The Cupra Formentor KM manual transmission fluid capacity is 1.5 liters across both the 1.5 TSI (110 kW) petrol and 2.0 TDI (110 kW) diesel variants, each fitted with a transaxle unit.
  • The 2.0 TDI (110 kW) lists the 1.5-liter figure specifically as an initial fill, meaning the value reflects the quantity used when fluid is introduced into a dry or newly assembled transaxle rather than a standard drain-and-refill service quantity.
  • The 1.5 TSI (110 kW) carries no initial fill designation on the 1.5-liter capacity, indicating the figure applies to normal service conditions without a distinction between first-fill and subsequent service volumes.
  • Both configurations are specified under normal use conditions, which in fluid service contexts refers to standard operating environments as opposed to severe or extended-duty cycles.

Other Systems