BAIC Senova Beijing U7

Manual transmission fluid capacity & service interval

BAIC Senova Beijing U7 manual transmission fluid capacity is 1,9-2,1 liters. Service intervals are 40000 km or 24 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Beijing U7 (100 kW) (2018- )
  • Use: Normal
  • Capacity 1,9-2,1 liter
  • Change 40000 km/ 24 months
  • Code: 5/1
Beijing U7 (120 kW) (2018- )
  • Use: Normal
  • Capacity 1,9-2,1 liter
  • Change 40000 km/ 24 months
  • Code: 5/1

Additional Notes

  • Both the 100 kW and 120 kW variants of the BAIC Senova Beijing U7, introduced in 2018, share an identical manual transaxle fluid capacity range of 1.9–2.1 liters.
  • A capacity expressed as a range rather than a fixed value, such as 1.9–2.1 liters, typically reflects normal fill variation during a service drain-and-refill, where residual fluid retained in passages accounts for the spread.
  • The specified change interval for both power variants is 40,000 km or 24 months under normal use conditions, meaning whichever threshold is reached first triggers a fluid replacement.
  • A 24-month time limit alongside the 40,000 km distance interval means that low-mileage operation does not exempt the transaxle fluid from periodic replacement, as fluid degradation occurs with age independent of distance traveled.
  • The uniform capacity and interval specifications across the 100 kW and 120 kW configurations suggest both variants share the same manual transaxle unit, despite differing engine output levels.

Other Systems