BAIC Senova Beijing X3

Automatic transmission fluid capacity & service interval

BAIC Senova Beijing X3 requires automatic transmission fluid with a capacity range of 1,4 to 1,5 liters. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Beijing X3 (2019- )
  • Use: Normal
  • Capacity 1,4-1,5 liter
  • Code: 4/1

Additional Notes

  • The BAIC Senova Beijing X3, from 2019, carries an automatic transaxle fluid capacity of 1.4 to 1.5 liters under normal use conditions. A capacity range of this size is characteristic of a partial service fill, representing the fluid exchanged during a routine drain and refill rather than a full overhaul or dry-fill procedure.
  • The 0.1-liter spread between the lower and upper capacity figures reflects the practical variation that can occur during a transaxle service, accounting for differences in drainage completeness and fluid retained within internal passages and the torque converter.
  • The normal use condition tied to the 1.4-1.5 liter specification indicates the interval and fill quantity apply to standard operating environments, as opposed to severe-duty cycles involving frequent towing, extreme temperatures, or stop-and-go driving patterns.

Other Systems