LSTractor MT1 Series

Power steering fluid capacity & service interval

LSTractor MT1 Series uses power steering fluid with a capacity of 12,5 liters. Service intervals include checking at 50 hours and changing at 500 hours. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • MT1.25 (2021- )
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 12,5 liter
  • Check 50 hours
  • Change 500 hours
  • MT122 (2017- )
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 12,5 liter
  • Check 50 hours
  • Change 500 hours
  • MT125 (2017- )
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 12,5 liter
  • Check 50 hours
  • Change 500 hours

Additional Notes

  • On the LSTractor MT1 Series, the power steering fluid circuit is integrated with the transaxle and hydraulic system, meaning the 12.5-liter capacity figure represents a shared reservoir rather than a dedicated power steering-only volume.
  • The 12.5-liter capacity is consistent across the MT1.25, MT122, and MT125 configurations, indicating a uniform fluid system design within the MT1 Series lineup.
  • A check interval of every 50 hours applies to all three configurations under normal use conditions, reflecting a relatively frequent monitoring schedule typical for combined hydraulic-steering systems in compact utility tractors.
  • The fluid change interval is set at 500 hours across the MT1.25, MT122, and MT125, which represents a 10-to-1 ratio between check and change intervals under normal operating conditions.
  • The MT122 and MT125 share identical capacity, check, and change specifications, with both carrying a starting year of 2017, while the MT1.25 carries a starting year of 2021 yet matches the same 12.5-liter capacity and service intervals.

Other Systems