LSTractor K series
Power steering fluid capacity & service interval
LSTractor K series requires power steering fluid with a capacity of 42 liters. Service intervals include checking at 50 hours and changing at 600 hours. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
Additional Notes
- The LSTractor K series shares a unified fluid circuit for the transaxle, hydraulic system, and power steering, meaning a single reservoir and fluid supply serves all three functions simultaneously.
- Both the K5047 and K5055 carry a power steering fluid capacity of 42 liters, a figure consistent with a combined transaxle and hydraulic system reservoir rather than a dedicated power steering unit alone.
- A check interval of 50 hours applies to both configurations under normal use conditions, reflecting the relatively short monitoring cycle typical of shared hydraulic circuits where fluid level and condition affect multiple systems at once.
- The change interval for both the K5047 and K5055 is set at 600 hours under normal use, which is a standard drain-and-refill cycle for tractor hydraulic systems operating in routine field conditions.
- The K5047 and K5055 share identical capacity and interval specifications, indicating no differentiation in fluid system design between the two models despite any differences in engine output or configuration.