LSTractor MT2 Series

Coolant capacity & service interval

LSTractor MT2 Series coolant capacity ranges from 3,3 to 7,1 liters. Service intervals include checking every 10 hours and changing every 24 months. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
MT225E (2020- )
  • Use: Normal
  • Capacity 4,9 liter
  • Check 10 hours
  • Change 24 months
MT225HE (2020- )
  • Use: Normal
  • Capacity 4,9 liter
  • Check 10 hours
  • Change 24 months
MT225S (2020- )
  • Use: Normal
  • Capacity 3,3 liter
  • Check 10 hours
  • Change 24 months
MT230E (2020- )
  • Use: Normal
  • Capacity 7,1 liter
  • Check 10 hours
  • Change 24 months
MT230HE (2020- )
  • Use: Normal
  • Capacity 7,1 liter
  • Check 10 hours
  • Change 24 months
MT235E (2020- )
  • Use: Normal
  • Capacity 7,1 liter
  • Check 10 hours
  • Change 24 months
MT235HE (2020- )
  • Use: Normal
  • Capacity 7,1 liter
  • Check 10 hours
  • Change 24 months
MT240E (2020- )
  • Use: Normal
  • Capacity 7,1 liter
  • Check 10 hours
  • Change 24 months
MT240HE (2020- )
  • Use: Normal
  • Capacity 7,1 liter
  • Check 10 hours
  • Change 24 months

Additional Notes

  • The LSTractor MT2 Series cooling system capacities fall into two distinct groups across the lineup. The MT225S stands apart with a 3.3-liter capacity, while the MT225E and MT225HE share a 4.9-liter capacity, and the MT230, MT235, and MT240 variants in both E and HE configurations each hold 7.1 liters.
  • The 3.3-liter capacity of the MT225S is notably smaller than the 4.9-liter figure shared by the MT225E and MT225HE, suggesting a different engine or cooling circuit configuration within the same 225 sub-series.
  • The 7.1-liter cooling system capacity found across the MT230E, MT230HE, MT235E, MT235HE, MT240E, and MT240HE represents the largest coolant volume in the MT2 Series lineup, consistent with higher-displacement engines requiring greater thermal management capacity.
  • All nine MT2 Series configurations carry an identical coolant check interval of every 10 hours of operation under normal use conditions, reflecting a standard early-interval inspection practice common in compact utility tractors.
  • The coolant change interval is set at 24 months across all MT2 Series configurations under normal use conditions. A time-based interval rather than an hour-based one is typical for coolant, as coolant additives degrade over time regardless of engine operating hours.
  • The E and HE variants within each sub-model, such as the MT230E and MT230HE, share identical cooling system capacities and service intervals, indicating that the drivetrain or transmission differences between those configurations do not affect the cooling system specifications.

Other Systems