LSTractor MT2 Series

Power steering fluid capacity & service interval

LSTractor MT2 Series uses power steering fluid with a capacity range of 17 to 32 liters. Service intervals consist of a 50 hour check and a 500 hour change. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • MT225E (2020- )
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 32 liter
  • Check 50 hours
  • Change 500 hours
  • MT225HE (2020- )
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 32 liter
  • Check 50 hours
  • Change 500 hours
  • MT225S (2020- )
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 17 liter
  • Check 50 hours
  • Change 500 hours
  • MT230E (2020- )
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 32 liter
  • Check 50 hours
  • Change 500 hours
  • MT230HE (2020- )
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 32 liter
  • Check 50 hours
  • Change 500 hours
  • MT235E (2020- )
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 32 liter
  • Check 50 hours
  • Change 500 hours
  • MT235HE (2020- )
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 32 liter
  • Check 50 hours
  • Change 500 hours
  • MT240E (2020- )
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 32 liter
  • Check 50 hours
  • Change 500 hours
  • MT240HE (2020- )
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 32 liter
  • Check 50 hours
  • Change 500 hours

Additional Notes

  • On the LS Tractor MT2 Series, the power steering fluid shares a combined reservoir with the transaxle and hydraulic system, meaning the listed capacity figures represent the total fluid volume for all three functions rather than a dedicated power steering circuit alone.
  • Eight of the nine MT2 Series configurations carry a 32-liter capacity for the combined transaxle, hydraulic, and power steering system. This relatively large volume is consistent with integrated hydraulic systems on compact utility tractors, where a single sump supplies both implement lift functions and steering assist.
  • The MT225S stands apart from the rest of the MT2 Series lineup with a 17-liter capacity for the same combined system. That figure is roughly half the 32-liter specification shared by the MT225E, MT225HE, MT230E, MT230HE, MT235E, MT235HE, MT240E, and MT240HE variants, indicating a meaningfully smaller fluid reservoir in the S configuration.
  • All nine configurations share an identical check interval of 50 hours under normal use conditions. On tractors used in agricultural or loader work, a 50-hour check interval allows early detection of fluid contamination or level loss before a full drain interval is reached.
  • The fluid change interval across all MT2 Series configurations is 500 hours under normal use conditions. At 500 hours, degraded fluid additives and accumulated particulates from hydraulic and steering components are addressed before they can accelerate wear in the shared system.
  • The E and HE suffix variants within each displacement class, such as the MT225E and MT225HE or the MT235E and MT235HE, share identical 32-liter capacities and the same 50-hour check and 500-hour change intervals, indicating no differentiation in fluid service requirements between those transmission variants.

Other Systems