LSTractor K series
Coolant capacity & service interval
LSTractor K series requires 9 liters of coolant. Service intervals include checks every 10 hours and changes every 600 hours. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| K5047 (2014- ) |
|
| K5055 (2014- ) |
|
Additional Notes
- The LSTractor K series coolant system capacity of 9 liters applies to both the K5047 and K5055 configurations, representing the total volume of the cooling circuit rather than a partial or top-off quantity.
- A check interval of 10 hours indicates a very frequent inspection cycle, consistent with the demands placed on coolant levels in agricultural equipment operating under continuous load conditions.
- The 600-hour change interval under normal use conditions applies equally to both the K5047 and K5055, meaning neither configuration calls for an accelerated or reduced drain schedule relative to the other.
- The K5047 and K5055 share identical capacity, check, and change specifications, indicating no differentiation in cooling system design between the two models within the 2014 starting year entries.