LSTractor J Series
Power steering fluid capacity & service interval
LSTractor J Series power steering fluid capacity is 20 liters. Service intervals include checks at 50 hours and changes at 600 hours. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- Across all five LSTractor J Series configurations covered here, the power steering fluid shares a single integrated reservoir with the transaxle and hydraulic system, meaning the 20-liter capacity figure represents the combined fill volume for all three functions rather than a dedicated power steering circuit alone.
- The 20-liter combined capacity is consistent across the J2020H, J2023H, J2030H, J23HST, and J27HST configurations, indicating no variation in reservoir size between gear-drive and hydrostatic transmission variants within the J Series.
- A fluid level check interval of every 50 hours applies to all five configurations under normal use conditions, reflecting a relatively frequent inspection schedule suited to equipment operating in field or loader work cycles.
- The fluid change interval is set at 600 hours under normal use conditions across all listed configurations, a figure that represents roughly one full working season or more for many agricultural applications.
- The J2020H carries a starting year of 2009, the same as the J2030H, placing both among the earliest entries in the J Series covered by these specifications, while the J23HST and J27HST both carry a starting year of 2012.
- The J2023H, with a starting year of 2014, is the most recent introduction among the five configurations listed, yet shares identical capacity and interval specifications with models introduced as early as 2009.