LSTractor I Series
Coolant capacity & service interval
LSTractor I Series coolant capacity is 4,9 liters. Service intervals include checks at 10 hours and changes at 600 hours. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| i3030 (2009-2010) |
|
| i3030H (2009-2010) |
|
| i3038 (2009-2010) |
|
| i3038H (2009-2010) |
|
Additional Notes
- The LSTractor I Series cooling system capacity across the i3030, i3030H, i3038, and i3038H models is 4.9 liters, which represents the total system fill volume including the engine block, hoses, and reservoir.
- A 4.9-liter cooling system capacity is a relatively modest volume, consistent with compact utility tractors where engine displacement and thermal load are lower than in full-size agricultural equipment.
- The coolant check interval is set at 10 hours of normal use across all four configurations, reflecting how frequently the system should be inspected for level and condition during early and ongoing operation.
- The coolant change interval under normal use conditions is 600 hours for the i3030, i3030H, i3038, and i3038H, meaning a full drain and refill of the 4.9-liter system is due at that accumulated operating time.
- The H-designated variants, i3030H and i3038H, share identical cooling system specifications with their non-H counterparts, indicating the hydrostatic transmission configuration does not alter the 4.9-liter capacity or the 600-hour change interval.
- The numerical difference between the i3030 and i3038 model designations, which typically reflects engine horsepower or displacement class, does not produce any variation in cooling system capacity or service intervals within the 2009-2010 model years.