LSTractor G series

Coolant capacity & service interval

LSTractor G series coolant capacity is 5,5 liters. Service intervals include checks at 10 hours and changes at 600 hours. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
G3033 (2011- )
  • Use: Normal
  • Capacity 5,5 liter
  • Check 10 hours
  • Change 600 hours
G3033H (2011- )
  • Use: Normal
  • Capacity 5,5 liter
  • Check 10 hours
  • Change 600 hours
G3038 (2011- )
  • Use: Normal
  • Capacity 5,5 liter
  • Check 10 hours
  • Change 600 hours
G3038H (2011- )
  • Use: Normal
  • Capacity 5,5 liter
  • Check 10 hours
  • Change 600 hours

Additional Notes

  • All four G series variants covered here share an identical cooling system capacity of 5.5 liters, which represents the total system fill volume including the engine block, radiator, and associated passages.
  • The LSTractor G series cooling system calls for a check interval of every 10 hours of operation, placing coolant level inspection among the most frequent routine tasks in the maintenance schedule.
  • A coolant change interval of 600 hours under normal use conditions applies uniformly across the G3033, G3033H, G3038, and G3038H variants.
  • The H-suffix models, G3033H and G3038H, carry the same 5.5-liter cooling system capacity and identical service intervals as their non-H counterparts, indicating no cooling system differentiation between the two configurations.
  • The 600-hour change interval is tied specifically to normal use conditions, meaning operation outside of normal parameters could affect how frequently coolant service is warranted.
  • The G3033 and G3038 share the same 5.5-liter capacity despite representing different displacement or power configurations, suggesting a common cooling system architecture across the two base models.