Lindner Geotrac 3

Coolant capacity & service interval

Lindner Geotrac 3 uses coolant with a capacity range of 17 to 18 liters. The service interval for the fluid is 72 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Geotrac 103 (2004- )
  • Use: Normal
  • Capacity 18 liter
  • Change 72 months
Geotrac 73 (2004- )
  • Use: Normal
  • Capacity 17 liter
  • Change 72 months
Geotrac 83 (2004- )
  • Use: Normal
  • Capacity 17 liter
  • Change 72 months
Geotrac 93 (2004- )
  • Use: Normal
  • Capacity 17 liter
  • Change 72 months

Additional Notes

  • The Lindner Geotrac 103 cooling system holds 18 liters, which is 1 liter more than the capacity listed for the Geotrac 73, 83, and 93 variants, each rated at 17 liters.
  • All four Geotrac 3 variants share a 72-month coolant change interval under normal use conditions, placing the service cycle on a 6-year schedule regardless of engine size.
  • A 72-month interval is notably long compared to many agricultural equipment cooling systems, reflecting the extended service life typical of modern long-life coolant formulations.
  • The 17-liter cooling system capacity on the Geotrac 73, 83, and 93 applies uniformly across three distinct model designations, indicating a shared or closely related engine cooling architecture among those variants.
  • The Geotrac 103 cooling system capacity of 18 liters is consistent with a larger displacement or higher-output engine requiring a greater volume of coolant to maintain operating temperatures.
  • All specifications listed apply to normal use conditions, meaning the 72-month change interval and stated capacities are not adjusted for severe-duty or heavy-load operating environments in the available data.

Other Systems