Lindner Geotrac 3

Brake fluid capacity & service interval

Lindner Geotrac 3 requires brake fluid with a capacity of 1,5 liters. The service interval for the fluid is 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Geotrac 103 (2004- )
  • Use: Normal
  • Capacity 1,5 liter
  • Change 24 months
Geotrac 73 (2004- )
  • Use: Normal
  • Capacity 1,5 liter
  • Change 24 months
Geotrac 83 (2004- )
  • Use: Normal
  • Capacity 1,5 liter
  • Change 24 months
Geotrac 93 (2004- )
  • Use: Normal
  • Capacity 1,5 liter
  • Change 24 months

Additional Notes

  • The Lindner Geotrac 3 series covers four variants — the Geotrac 73, 83, 93, and 103 — all introduced from 2004, and all sharing identical brake fluid specifications across the board.
  • Each variant carries a brake fluid capacity of 1.5 liters, which is consistent with a combined hydraulic brake and clutch system rather than a standalone brake circuit.
  • The shared hydraulic system serving both braking and clutch functions means the 1.5-liter figure accounts for the full fluid volume across both subsystems simultaneously.
  • A 24-month change interval applies to all four variants under normal use conditions, meaning the interval is tied to calendar time rather than operating hours or mileage.
  • The uniform 1.5-liter capacity across the Geotrac 73, 83, 93, and 103 suggests a common hydraulic circuit architecture regardless of the power output differences implied by the variant numbering.

Other Systems