Lamborghini Nitro

Coolant capacity & service interval

Lamborghini Nitro uses coolant with a capacity of 11 liters. Service intervals include checks every 10 hours and changes every 2000 hours or 24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Nitro 100 T4i (2014-2017)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Nitro 100 T4i Hi-Profile (2014-2017)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Nitro 110 T4i (2014-2017)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Nitro 110 T4i Hi-Profile (2014-2017)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Nitro 120 T4i Hi-Profile, ->ZKDBA002W0TL20001 (2014-2017)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Nitro 120 T4i Hi-Profile, ->ZKDBA402W0TL20001 (2014-2017)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Nitro 130 T4i (2014-2017)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Nitro 130 T4i Hi-Profile (2014-2017)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Lamborghini Nitro cooling system capacity is 11 liters across all configurations in the 2014-2017 range, covering the Nitro 100, 110, 120, and 130 T4i variants in both standard and Hi-Profile trims. A uniform capacity across an entire model lineup typically reflects a shared engine block and cooling circuit architecture.
  • The coolant check interval is set at every 10 hours of operation for all listed configurations. On agricultural and utility machinery, hour-based intervals are standard practice because engine load and runtime vary significantly from calendar time, making hours a more reliable measure of actual wear exposure.
  • The coolant change interval is 2000 hours or 24 months, whichever comes first, under normal use conditions. The dual-trigger format means a machine used infrequently could reach the 24-month calendar limit well before accumulating 2000 operating hours, while a heavily used machine would hit the hour threshold first.
  • The Nitro 120 T4i Hi-Profile is specified in two distinct serial number ranges, one ending at ZKDBA002W0TL20001 and another at ZKDBA402W0TL20001. Both share the same 11-liter capacity and identical service intervals, indicating the serial number distinction reflects a production or configuration boundary rather than a difference in cooling system specification.
  • All eight configurations carry the same normal use condition designation. In service interval terminology, normal use typically describes operation within standard load, temperature, and environmental parameters, as opposed to severe use, which would involve extreme dust, heat, or continuous heavy load cycles that shorten service intervals.

Other Systems