Lamborghini Nitro R

Brake fluid capacity & service interval

Lamborghini Nitro R uses brake fluid with a capacity of 1 liter. The service interval for fluid replacement is 50 hours. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Nitro R 100 T4I, stage 3B->ZKDY380200TL10001 (2013-2017)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Nitro R 100 T4I, stage 3B->ZKDY460200TL10001 (2013-2017)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Nitro R 110 T4I, stage 3B->ZKDY420200TL10001 (2013-2017)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Nitro R 110 T4I, stage 3B->ZKDY500200TL10001 (2013-2017)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Nitro R 120 T4I, stage 3B->ZKDY540200TL10001 (2013-2017)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Nitro R 90 T4I, stage 3B->ZKDY340200TL10001 (2013-2017)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours

Additional Notes

  • The Lamborghini Nitro R hydraulic brake system holds 1 liter of brake fluid across all listed configurations, covering the 90 T4I, 100 T4I, 110 T4I, and 120 T4I variants from 2013-2017.
  • Each configuration specifies a serial number threshold using the "stage 3B ->" notation, meaning the listed capacity and interval apply only to units from that serial number onward.
  • The 50-hour change interval is measured in operating hours rather than distance or calendar time, which is standard practice for agricultural and off-road machinery where annual mileage varies widely and engine load is a more relevant wear indicator.
  • A 1-liter brake fluid capacity is consistent with a single-circuit or compact dual-circuit hydraulic brake system, typical of tractors in the sub-120 horsepower class.
  • All six configurations share an identical 1-liter capacity and 50-hour service interval, indicating a common brake system architecture across the 90, 100, 110, and 120 T4I power variants.
  • The T4I designation across all variants refers to Tier 4 Interim emissions compliance, a regulated engine standard that affects engine design but does not alter the brake fluid specifications listed here.
  • The normal use condition applies uniformly across all six rows, meaning the 50-hour interval is not adjusted for more demanding operating environments in these specifications.

Other Systems