Lamborghini Nitro

Brake fluid capacity & service interval

Lamborghini Nitro uses brake fluid with a capacity of 1 liter. The service interval for the fluid is 50 hours. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Nitro 100 T4i (2014-2017)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Nitro 100 T4i Hi-Profile (2014-2017)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Nitro 110 T4i (2014-2017)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Nitro 110 T4i Hi-Profile (2014-2017)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Nitro 120 T4i Hi-Profile, ->ZKDBA002W0TL20001 (2014-2017)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Nitro 120 T4i Hi-Profile, ->ZKDBA402W0TL20001 (2014-2017)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Nitro 130 T4i (2014-2017)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Nitro 130 T4i Hi-Profile (2014-2017)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours

Additional Notes

  • All Lamborghini Nitro configurations listed across the 2014-2017 model years share a uniform brake fluid capacity of 1 liter, which is a typical fill volume for a hydraulic brake system on a compact agricultural or utility tractor of this class.
  • The 50-hour change interval applies under normal use conditions across every listed configuration, from the Nitro 100 T4i through to the Nitro 130 T4i Hi-Profile variants.
  • A 50-hour service interval is notably shorter than the hour-based intervals commonly seen in engine oil or transmission fluid schedules on similar machinery, reflecting the sensitivity of hydraulic brake fluid to moisture absorption and contamination over time.
  • The specifications cover both standard and Hi-Profile trim levels across the 100, 110, 120, and 130 power variants, and the brake fluid capacity of 1 liter remains consistent regardless of trim or power rating.
  • The Nitro 120 T4i Hi-Profile appears in two separate serial number range entries, distinguished by the cutoff serials ZKDBA002W0TL20001 and ZKDBA402W0TL20001, yet both carry identical capacity and interval specifications of 1 liter and 50 hours respectively.
  • Serial number breakpoints of the kind used in the Nitro 120 T4i Hi-Profile entries typically indicate a mid-production revision, where manufacturers separate specifications by build sequence to account for potential engineering changes between production runs.
  • The hydraulic brake system note attached to each row distinguishes these figures as specific to the brake circuit rather than any other hydraulic system on the machine, which is relevant on tractors where multiple hydraulic circuits may share or separately hold fluid.

Other Systems