Lamborghini Mach VRT

Coolant capacity & service interval

Lamborghini Mach VRT coolant capacity is 36 liters. Service intervals include checks at 10 hours and changes at 2000 hours or 24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Mach 210 T4i VRT, Stage 3B (2014-2017)
  • Use: Normal
  • Capacity 36 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Mach 225 T4 VRT, Stage 3A/4 (2014-2017)
  • Use: Normal
  • Capacity 36 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Mach 230 T4i VRT, Stage 3B (2014-2017)
  • Use: Normal
  • Capacity 36 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Mach 230 VRT, Stage 5->WSXFT30200LL10001 (2014-2017)
  • Use: Normal
  • Capacity 36 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Mach 250 T4 VRT, Stage 3A/4 (2014-2017)
  • Use: Normal
  • Capacity 36 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Mach 250 T4i VRT, Stage 3B (2014-2017)
  • Use: Normal
  • Capacity 36 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Mach 250 VRT, Stage 5->WSXFT50200LL10001 (2014-2017)
  • Use: Normal
  • Capacity 36 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Mach 250 VRT, Stage 5->WSXFN10200LL10001 (2014-2017)
  • Use: Normal
  • Capacity 36 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Lamborghini Mach VRT cooling system capacity is 36 liters across all configurations in the 2014-2017 range, including the Mach 210, 225, 230, and 250 variants. A 36-liter figure is characteristic of large-displacement agricultural or industrial machinery cooling systems, where substantial thermal management is required for sustained heavy-load operation.
  • The coolant check interval is set at 10 hours of operation under normal use conditions across every listed configuration. A 10-hour check interval reflects the high thermal and mechanical stress typical of professional-grade machinery, where coolant level and condition can change more rapidly than in standard automotive applications.
  • The coolant change interval is 2000 hours or 24 months, whichever comes first, under normal use conditions. The dual-trigger structure means a machine used infrequently could reach the 24-month calendar limit well before accumulating 2000 operating hours, making the time-based threshold the governing factor in low-utilization scenarios.
  • Stage 3A/4 configurations, represented by the Mach 225 T4 VRT and Mach 250 T4 VRT, share identical cooling system specifications with the Stage 3B and Stage 5 variants at 36 liters capacity and the same check and change intervals. The emissions stage designation, which refers to engine exhaust certification tiers, does not affect the cooling system service requirements in these specifications.
  • The Mach 230 VRT and Mach 250 VRT Stage 5 configurations are each identified by a serial number threshold, specifically units from serial WSXFT30200LL10001 and WSXFN10200LL10001 or WSXFT50200LL10001 onward respectively. Serial number breakpoints of this kind typically indicate a mid-production design revision, and the cooling system capacity and service intervals for these units remain at 36 liters, 10-hour checks, and 2000-hour or 24-month changes.
  • The T4i designation appearing on the Mach 210, 230, and 250 variants denotes an interim Tier 4 engine, a classification used in off-road machinery to indicate compliance with an intermediate phase of emissions regulations. Despite the engine technology difference between T4i and T4 variants, the cooling system capacity and service intervals are uniform across all engine types in the 2014-2017 Mach VRT lineup.

Other Systems