Goldoni Maxter series

Coolant capacity & service interval

Goldoni Maxter series coolant capacity ranges from 7 to 8 liters. Service intervals include checking every 10 hours and changing every 24 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Maxter 60 (ZA6300), VM D703
  • Use: Normal
  • Capacity 7 liter
  • Check 10 hours
  • Change 24 months
Maxter 60 RS (ZS6300), VM D703
  • Use: Normal
  • Capacity 7 liter
  • Check 10 hours
  • Change 24 months
Maxter W70RS REV (ZER4), VM D703-TI
  • Use: Normal
  • Capacity 7-8 liter
  • Check 10 hours
  • Change 24 months

Additional Notes

  • The Goldoni Maxter 60 (ZA6300) and Maxter 60 RS (ZS6300), both fitted with the VM D703 engine, share an identical cooling system capacity of 7 liters, indicating a common cooling circuit architecture between the two configurations.
  • The Maxter W70RS REV (ZER4), equipped with the turbocharged VM D703-TI engine, carries a cooling system capacity range of 7 to 8 liters, reflecting a variable fill volume that can differ depending on how completely the system is drained and refilled during service.
  • Across all three configurations, the coolant check interval is set at 10 hours of operation under normal use conditions, a notably short interval consistent with the demands of compact agricultural machinery operating in variable field environments.
  • The change interval of 24 months applies uniformly across the Maxter 60, Maxter 60 RS, and Maxter W70RS REV under normal use conditions, meaning coolant renewal is governed by calendar time rather than operating hours alone.

Other Systems