Scania 93, 113, 143 G/P/R/T

Power steering fluid capacity & service interval

Scania 93, 113, 143 G/P/R/T power steering fluid capacity is 3,8 liters. Service intervals require a check every 30000 km. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
113 (1988-1995)
  • Use: Normal
  • Capacity 3,8 liter
  • Check 30000 km
143 (1988-1995)
  • Use: Normal
  • Capacity 3,8 liter
  • Check 30000 km
93 (1988-1995)
  • Use: Normal
  • Capacity 3,8 liter
  • Check 30000 km

Additional Notes

  • The Scania 93, 113, and 143 G/P/R/T all share an identical power steering fluid capacity of 3.8 liters across the full 1988-1995 production span.
  • A 3.8-liter capacity in a heavy-duty truck power steering system reflects the volume of the reservoir and hydraulic circuit combined, which is typical for large commercial vehicle steering gear setups.
  • The check interval for power steering fluid is set at 30,000 km for all three model variants, applied under normal use conditions.
  • The uniform 30,000 km check interval across the 93, 113, and 143 suggests the hydraulic steering systems in these variants share a common service schedule regardless of engine displacement differences between the models.
  • The specification is listed as a fluid check rather than a full fluid change, meaning the 30,000 km figure represents an inspection point for fluid level and condition rather than a mandatory replacement interval.
  • All three variants carry the same 3.8-liter figure for both the service fill and the system capacity, indicating no separate overhaul or dry-fill volume is specified apart from the standard service quantity.

Other Systems