Scania 93, 113, 143 G/P/R/T

Coolant capacity & service interval

Scania 93, 113, 143 G/P/R/T models utilize coolant with a capacity range of 42 to 79 liters. Service intervals require a change every 120000 km. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
113 (1988-1995)
  • Use: Normal
  • Capacity 42 liter
  • Change 120000 km
143 (1988-1995)
  • Use: Normal
  • Capacity 79 liter
  • Change 120000 km
93 (1988-1995)
  • Use: Normal
  • Capacity 42-79 liter
  • Change 120000 km

Additional Notes

  • The Scania 143 carries a cooling system capacity of 79 liters, the largest single value across the three model lines, reflecting the greater thermal demands of its larger engine displacement.
  • The Scania 113 holds a cooling system capacity of 42 liters, placing it at the lower end of the capacity range seen across the 93, 113, and 143 series.
  • The 93 series lists a cooling system capacity range of 42-79 liters under normal use conditions, indicating variation across the different configurations within that model line rather than a single fixed fill volume.
  • All three model lines share an identical service interval of 120,000 km for coolant change under normal use conditions, applying uniformly to the 93, 113, and 143 across the 1988-1995 production span.
  • The 143's 79-liter capacity is nearly double the 42-liter figure of the 113, a difference that has practical implications for the volume of coolant fluid required at each 120,000 km service interval.
  • The capacity range stated for the 93 series spans from 42 liters to 79 liters, values that correspond exactly to the fixed capacities of the 113 and 143 respectively, suggesting the 93 series encompasses configurations comparable in cooling system size to both of the other model lines.

Other Systems