Scania 93, 113, 143 G/P/R/T

Automatic transmission fluid capacity & service interval

Scania 93, 113, 143 G/P/R/T automatic transmission fluid capacity ranges from 17 to 25 liters. Service intervals include checks at 30000 km and changes at 60000 km. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
113 (1988-1995)
  • Use: Normal
  • Capacity 25 liter
  • Check 30000 km
  • Change 60000 km
  • Code: KH 424
143 (1988-1995)
  • Use: Normal
  • Capacity 25 liter
  • Check 30000 km
  • Change 60000 km
  • Code: GRH 880
93 (1988-1995)
  • Use: Normal
  • Capacity 17 liter
  • Check 30000 km
  • Change 60000 km
  • Code: GAZ 770 6/1

Additional Notes

  • The Scania 113 and 143 share an identical torque converter fluid capacity of 25 liters, while the 93 carries a notably lower 17-liter capacity in its automatic transmission configuration.
  • A torque converter system, as seen in the 113 and 143 specifications, typically holds more fluid than a conventional automatic transmission due to the hydraulic coupling chamber, which accounts for the 8-liter difference between those models and the 93.
  • Across all three models covering 1988-1995, the fluid change interval is set at 60000 km under normal use conditions.
  • The check interval across the 93, 113, and 143 is 30000 km, meaning a fluid inspection falls at the halfway point of each full change cycle.
  • All three configurations are rated under normal use conditions, meaning the 60000 km change interval applies to standard operating environments rather than severe-duty cycles.
  • The 93 automatic transmission capacity of 17 liters reflects a service fill volume, representing the amount of fluid required during a standard drain-and-refill service rather than a complete overhaul fill.

Other Systems