Scania 93, 113, 143 G/P/R/T

Clutch fluid capacity & service interval

Scania 93, 113, 143 G/P/R/T clutch fluid capacity is 0,33 liter. Service intervals consist of a check every 30000 km. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
113 (1988-1995)
  • Use: Normal
  • Capacity 0,33 liter
  • Check 30000 km
143 (1988-1995)
  • Use: Normal
  • Capacity 0,33 liter
  • Check 30000 km
93 (1988-1995)
  • Use: Normal
  • Capacity 0,33 liter
  • Check 30000 km

Additional Notes

  • The Scania 93, 113, and 143 G/P/R/T all share an identical clutch fluid capacity of 0.33 liters across the full 1988-1995 model range, indicating a consistently sized hydraulic clutch system across these variants.
  • A capacity of 0.33 liters is a relatively small reservoir volume, which is characteristic of a hydraulic clutch master cylinder circuit rather than a large-scale hydraulic actuation system.
  • All three models specify a hydraulic clutch system, meaning clutch engagement is managed through fluid pressure rather than a mechanical cable linkage.
  • The check interval for clutch fluid is set at 30,000 km under normal use conditions for all three models across the 1988-1995 period, with no variation between the 93, 113, and 143 configurations.
  • The specification applies to normal use conditions, and the 30,000 km interval reflects a routine inspection point for fluid level and condition rather than a full fluid replacement schedule.
  • The uniformity of both the 0.33-liter capacity and the 30,000 km check interval across the 93, 113, and 143 suggests a shared hydraulic clutch circuit design despite the differences in engine displacement and power output among these models.

Other Systems