Kymco MX'er
Brake fluid capacity & service interval
Kymco MX'er brake fluid capacity is between min and max. Service intervals include 1 month, 6 months, and 12 months. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| MX'er 125 (2007- ) |
|
| MX'er 125 (2007- ) |
|
| MX'er 150 (2007- ) |
|
| MX'er 150 (2007- ) |
|
| MX'er 50 (2007- ) |
|
| MX'er 50 (2007- ) |
|
Additional Notes
- The Kymco MX'er brake fluid specifications cover the hydraulic brake system across the 50, 125, and 150 variants, with the 2007 model year serving as the starting point for all three.
- Fluid level across all three variants is expressed as a range rather than a fixed volume, with the reservoir kept between the minimum and maximum marks rather than filled to a precise capacity.
- Under normal use conditions, the hydraulic brake system on all three variants follows a check interval of every 6 months and a full fluid change interval of every 12 months.
- An initial service condition applies to all three variants and calls for a fluid level check at 1 month, which is considerably earlier than the 6-month check interval assigned to normal use.
- The initial service check interval of 1 month does not include a fluid change specification, distinguishing it from the normal use schedule, which carries both a check and a change interval.
- The 50, 125, and 150 variants share identical brake fluid service intervals and level specifications, indicating no differentiation in brake fluid maintenance requirements across the displacement range within the MX'er lineup.