Kymco Like
Brake fluid capacity & service interval
Kymco Like uses brake fluid with a capacity range defined by min and max levels. Service intervals include checks every 3000 km and changes every 10000 km or 12 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Like 125 4T (2009-2016) |
|
| Like 200i (2009-2016) |
|
| Like 50 2T (2009-2016) |
|
| Like 50 4T (2009-2016) |
|
Additional Notes
- Across the Kymco Like lineup from 2009-2016, brake fluid capacity for the hydraulic brake system is expressed as a level range rather than a fixed volume, with the reservoir kept between the minimum and maximum marks rather than filled to a precise quantity.
- The Like 125 4T, Like 200i, and Like 50 4T all share identical service intervals for brake fluid under normal use conditions: an inspection every 3,000 km and a full fluid change every 10,000 km or 12 months, whichever comes first.
- The time-based threshold of 12 months for brake fluid replacement reflects the hygroscopic nature of brake fluid, which absorbs moisture from the atmosphere over time and lowers its boiling point regardless of mileage accumulated.
- The Like 50 2T carries the same hydraulic brake system and the same min-to-max level specification as the other variants, but no inspection interval or change interval is listed in the specifications for that model.
- The displacement and engine type differences across the lineup, ranging from the 50cc two-stroke to the 50cc four-stroke, 125cc four-stroke, and 200i fuel-injected variant, do not produce any variation in the brake fluid level specification, which remains a min-to-max fill across all four configurations.