Hytrack HY 560

Brake fluid capacity & service interval

Hytrack HY 560 uses brake fluid with a capacity range between min and max. Service intervals occur every 24 months or 200 hours. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
HY 560 4x4 EFI
  • Use: Normal
  • Between min and max.
  • Change 24 months/ 200 hours

Additional Notes

  • The Hytrack HY 560 4x4 EFI brake fluid level is maintained between the minimum and maximum marks on the reservoir, which is a standard fill range indicating a service-level top-up rather than a full system overhaul capacity.
  • The hydraulic brake system on the HY 560 4x4 EFI follows a change interval of 24 months or 200 hours, whichever comes first, under normal use conditions.
  • The dual-trigger interval of 24 months and 200 hours reflects how brake fluid degrades both through time and operational use, meaning either threshold alone is sufficient to prompt a fluid change.