Hytrack Jobber

Brake fluid capacity & service interval

Hytrack Jobber uses brake fluid with a capacity range of 0.25 to 0.5 liters. Service intervals occur every 24 months or 200 hours. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Jobber 320 4X2
  • Use: Normal
  • Between min and max.
  • Change 24 months/ 200 hours
Jobber 320 4X4
  • Use: Normal
  • Between min and max.
  • Change 24 months/ 200 hours
Jobber 400 4X4
  • Use: Normal
  • Between min and max.
  • Change 24 months/ 200 hours

Additional Notes

  • The Hytrack Jobber brake fluid level specification calls for a fill between the minimum and maximum marks on the reservoir, which is a standard service-level fill rather than a measured volumetric capacity.
  • The 24-month interval tied to normal use conditions means the brake fluid change is time-driven as well as usage-driven, with whichever threshold arrives first serving as the service trigger.
  • The 200-hour threshold paired with the 24-month interval reflects the dual-condition service structure common in utility and off-road vehicles, where operating hours can accumulate faster than calendar time under heavy use.
  • The Jobber 320 4X2, Jobber 320 4X4, and Jobber 400 4X4 all share identical brake fluid service intervals of 24 months or 200 hours under normal use conditions, with no variation across the two-wheel-drive and four-wheel-drive configurations or between the 320 and 400 engine displacements.
  • All three configurations specify a hydraulic brake system, which is the context in which the min-to-max fill range and the 24-month/200-hour change interval apply.