Hytrack HY 50

Brake fluid capacity & service interval

Hytrack HY 50 uses brake fluid with a capacity range between min and max. Service intervals occur every 24 months or 200 hours. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
HY 50H
  • Use: Normal
  • Between min and max.
  • Change 24 months/ 200 hours
HY 50S Girly
  • Use: Normal
  • Between min and max.
  • Change 24 months/ 200 hours
HY 50SX
  • Use: Normal
  • Between min and max.
  • Change 24 months/ 200 hours

Additional Notes

  • The Hytrack HY 50 brake fluid capacity specification is expressed as a range rather than a fixed volume, with the reservoir fill level required to fall between the minimum and maximum marks on the reservoir.
  • The HY 50H, HY 50S Girly, and HY 50SX all share identical service intervals for brake fluid, with a change required at 24 months or 200 hours of operation, whichever comes first.
  • The dual-trigger interval of 24 months or 200 hours reflects a standard approach to brake fluid maintenance, where both calendar time and operational hours serve as independent thresholds for fluid replacement.
  • All three variants specify the hydraulic brake system as the applicable system, meaning the interval and fill-level guidance applies specifically to the hydraulic circuit rather than any mechanically actuated braking components.
  • The consistent specifications across the HY 50H, HY 50S Girly, and HY 50SX suggest the hydraulic brake system architecture is shared among all three variants within the HY 50 lineup.