Hytrack HY 500

Brake fluid capacity & service interval

Hytrack HY 500 requires brake fluid with a capacity between min and max. Service intervals occur every 24 months or 200 hours. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
HY 500 4x2 EFI
  • Use: Normal
  • Between min and max.
  • Change 24 months/ 200 hours

Additional Notes

  • The Hytrack HY 500 4x2 EFI brake fluid capacity is expressed as a fill range between the minimum and maximum marks rather than a fixed volume, which is characteristic of a hydraulic brake system reservoir where the fluid level is maintained within a defined band rather than filled to a precise measured quantity.
  • The service interval for the hydraulic brake system on the HY 500 4x2 EFI is set at 24 months or 200 hours under normal use conditions, with whichever threshold is reached first serving as the trigger for a fluid change.
  • The dual-interval structure of 24 months and 200 hours reflects the two ways operating time accumulates on a vehicle — calendar time and actual engine hours — meaning a unit used infrequently could reach the time-based interval well before the hour-based one.