Bremach Brick

Transfer case fluid capacity & service interval

Bremach Brick transfer case fluid capacity is 2,5 liters. Service intervals include checks every 15000 km or 500 hours and changes every 30000 km. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Brick 4x4 Euro 3 (2001-2008)
  • Use: all
  • Capacity 2,5 liter
  • Check 15000 km/ 500 hours
  • Change 30000 km

Additional Notes

  • The transfer case on the Bremach Brick 4x4 Euro 3 holds 2.5 liters of fluid, a figure that reflects a service fill level rather than a full overhaul or dry fill, as the unit retains residual fluid during a standard drain procedure.
  • The check interval is set at 15,000 km or 500 hours, whichever comes first, meaning the specification accounts for both distance-based and hour-based operation — the latter being relevant for vehicles used in low-speed or stationary work cycles where engine hours accumulate faster than road kilometers.
  • The fluid change interval is 30,000 km, which is exactly double the check interval, placing a full drain-and-refill at every second inspection point in a distance-based maintenance schedule.
  • The use condition is listed as "all," meaning the 15,000 km / 500-hour check and 30,000 km change intervals apply regardless of operating conditions, with no separate severe-duty or light-duty interval distinctions present in the specification.
  • The specification applies to the 4x4 variant of the Bremach Brick Euro 3 across the 2001-2008 model years, covering the transferbox as a distinct service point separate from the transmission or axle differentials.

Other Systems