Bedford Midi Van
Manual transmission fluid capacity & service interval
Bedford Midi Van manual transmission fluid capacity ranges from 1,55 to 4,4 liters. Service intervals include checks at 20000 km or 12 months, and fluid changes at 40000 km or 24 months. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Midi 2.0 (4x2) (1989-1990) |
|
| Midi 2.0 (4x4) (1989-1990) |
|
| Midi 2.0 Turbo D (4x2) (1989-1990) |
|
| Midi 2.2 D (4x2) (1989-1990) |
|
| Midi 2.2 D (4x4) (1989-1990) |
|
Additional Notes
- The Bedford Midi Van manual transmission fluid capacity splits clearly along drivetrain lines rather than engine type. All 4x2 variants — the 2.0, 2.0 Turbo D, and 2.2 D — share a 1.55-liter capacity, while both 4x4 variants carry 2.85 liters more at 4.4 liters total.
- The significantly larger 4.4-liter figure in the 4x4 configurations reflects the additional fluid volume required by a transfer case or additional gearbox components associated with four-wheel-drive systems, rather than the transmission alone.
- All 4x2 variants specify only a check interval of 20,000 km or 12 months under normal use conditions, with no fluid change interval listed alongside.
- The 4x4 variants carry a two-stage service schedule under normal use conditions: a fluid level check at 20,000 km, followed by a full fluid change at 40,000 km or 24 months.
- The 12-month time limit paired with the 20,000 km check interval on 4x2 models means whichever threshold arrives first would trigger a service, a common dual-trigger format used when annual mileage may fall short of the distance figure.
- The 4x4 change interval of 24 months aligns with a two-year calendar cycle, which corresponds to completing two of the 12-month check cycles before a full drain and refill is due.
- Despite the difference in fuel and induction type between the 2.0 petrol, 2.0 Turbo D, and 2.2 D engines, all three 4x2 configurations share identical manual transmission fluid capacity and service interval specifications, indicating the transmission unit rather than the engine determines those values.